Rocket PCB back plane pcb technologies rocket at discount
- Rocket PCB pays great attention to product quality and strives for perfection in every detail of products. This enables us to create fine products.
- Rocket PCB Solution Ltd. is a modern company engaged in the production, processing, service and distribution of printed circuit board.
- Rocket PCB has R&D talents with great technical capabilities and management talents with rich experience. Our company is able to develop sustainably thanks to them.
1. Rocket PCB is produced after a series of processes. It will go through material preparation, parts' cutting, stamping, forging, honing, and surface polishing and painting. Its components are always soldered in, which contributes to durability
2. With the previously mentioned characteristics, the product is ardently loved by decoration engineers, home designers, and architectural decoration designers. It is specifically designed to lessen the chances of shorts and wiring issues
3. This product has a perfect cushioning effect. It will not tend to crack or break under repeated impacts from the foot and ground. The product makes the process of replacing the particular failure components easier
FEATURES OF BACKLANE
The backplane has a lot of distinctive features.
Size
A large part of the backplane is connected to some of the other boards at right angles. This requires that the backplane be much larger than conventional PCBs and that some backplanes even reach the 762mmx1066.8mm
The number of layers
In terms of the most common backplane, its layer is already in the 16~28, this number is much higher than the ordinary PCB
Thickness
From the structure of the backplane itself, in order to be able to withstand more mechanical stress, it has to be designed much thicker than ordinary PCB. In most cases, the designer has to increase its thickness, and the typical backplane thickness is 2mm-4mm, which can be as thick as 4mm-6mm.
With the continuous development of science and technology, users of bandwidth requirements are becoming more and more stringent, which requires that the design of the backplane to be precise and rigorous enough, the production process of ordinary PCB has been far from meeting the needs of modern production. In order to produce a backplane that meets a variety of conditions, it is necessary to eliminate some of the original conventional equipment and replace it with a hybrid bus structure and assembly technology.
Product CASE
◪ Panel sizes up to 54 inches
◪ Over 70 layers
◪ Blind and back drilled through holes
◪ Dual diameter holes
◪ Heavy copper layers
◪ Connector expertise
Product application
Company Features
1. Rocket PCB Solution Ltd. stands prominently in the domestic pcb technologies circle. All testing reports are available for our Backplane PCB .
2. Our professional equipment allows us to fabricate such .
3. Every piece of pcb order has to go through material checking, double QC checking and etc. Our company pays much attention to local economic growth. We always sponsor local events, employing local workers, and does fair trade practices. Call now!