loading

bizarre \'ball\' airship can pick up and drop off deliveries using an artificial tongue

While many tech companies are developing drones to ship goods, one company believes a giant ball might be more appropriate.
Free processing is an area.
Shape autonomous vehicles filled with helium can use \"tongue\" to suck away objects.
The company says it can pick up and drop items up to 400g.
Scroll down to view the video and think the system is able to react independently to the surrounding environment, \"already meeting a possible standard for future workplaces \".
This technology combines the emotional field of Festo\'s Bionic Learning Network, the flight field with a camera system, and the flexible shape ripper that can handle different problems
A forming object.
Crawling and flying has always been a topic for the Bionic Learning Network, the company\'s website says.
For the first time, Festo has combined the two areas.
\"Indoor flying objects can maneuver independently in any direction, picking and dropping items independently where needed.
\"The processing system of indoor flyers consists of a super
Light carbon rings of eight adaptive propellers.
A rotatable helium ball is wrapped in the middle of the structure, which is connected to the grab mechanism.
Speaking of a technology created two years ago, the company said flying helium balls themselves are a further development in the emotional field.
\"The knowledge gained from the work of BioniOpter is used in the design of the propeller.
\"The developer took the wing principle of the artificial dragonfly further and transferred it to the drive, which is now also used for free motion handling.
Carbon rings in the middle of the sphere have printed circuit boards, integrated wireless technology, online
Board sensors, rotors, and steering drives for ReportsGizmag.
It uses an adaptive drive system to push itself in the direction of rotation and crater to achieve \"dynamic flight behavior in all spatial directions \".
Free motion treatment consists of an inflatable sphere with a diameter of 54, a rotor
Ring of package like chameleon\'s tongue and flexible holder.
The gripper is based on the working principle of the chameleon tongue, basically helium-
A filling film sleeve that wraps itself around an object up to 400g (. 09 pounds).
Before pumping with helium, the weight of the flyer was only 3 pounds, but the addition of helium gave itthe-
Air weight of 50g.
In order to get from one place to another, the free handling and indoor tracking system of 10 infrared cameras is used.
These cameras collect information about the position of the sphere by taking 160 frames per second, which is sent back to the master computer of analysis 3.
7 billion pixels per second.
\"There are two cameras for detecting objects: one on the holder and the other on the coat.
The system can recognize objects without manual operation, which is done by saving a large number of images of different sizes, views and light conditions.
It uses six rechargeable batteries for about 40 minutes each time.
Like the human brain, the computer can connect each experience value, generate a coherent whole image, and then use it to extract the key features of the object in question, Mr. Festo said.

GET IN TOUCH WITH Us
recommended articles
Knowledge Product case Info Center
Cx is a non-polar capacitor, and the IC integrated circuit module Ux is an IC (Integrated circuit components)
Kx is a component library of different manufacturers.
PCB thick transparent acrylic watch-
Plexiglass sheet aluminum grille, speaker, amplifier, battery, paint, PLEXIGLASS glue, screw Step 2: Prepare materials, warning: it is very important to use safety equipment, goggles and masks! !
Use the soldering iron and try to remove as much as possible from one side of the PCB board.
Objective: according to the requirements of engineering data MI, cut large sheets that meet the requirements into small pieces to produce plates.
Here are some obvious advantages for small batch PCB components of great value to manufacturers: cost advantage-
Although traditional economies of scale are known to have large output, low-capacity PCB production has significant cost advantages in changing technical schemes.
Industry-leading multi-layer circuit board processing and manufacturing technology procurement of top-level raw materials to create high-precision multi-layer PCB1 and top-level technical team for you, with rich production experience for precision multi-layer circuit boards ☆ all employees have 3-
Professional and technical personnel with 12 years of PCB experience, exquisite technology ☆ 8 industrial scientific and technological innovations, 20 PCB production technology innovations, effective o
If you still think that PCB design and technology are all tough guys who don't understand the amorous feelings, then let the following circuit board designs, which can be called works of art, subvert your concept.
Step 1: energize the circuit board.
Advantages and disadvantages are obvious: Advantages: low cost, smooth surface and good weldability (In the absence of oxidation).
Each winding circuit on the circuit board represents a different signal.
FPC in the process of production, in order to save costs, improve production efficiency, shorten the production cycle, production will have a puzzle way, rather than a single chip production.
Copyright © 2026 Rocket PCB Solution Ltd. |Privacy Policy Sitemap
Customer service
detect